Tag: 2024

Demonstration

Dan demonstrated how to make Gnomes.

Dan provided notes so anyone can make a gnome like he does:

Show & Tell

We had a normal show and tell where we saw members amazing work

Paul Demmert shared how to make a Celtic Knot rolling pin.  A Celtic knot is an infinite loop type pattern which makes an impressive decoration on a rolling pin.  But first we had our regular show and tell where several people showed us what they’ve been making lately, from sculptures to grinders to chips and dip bowl.

Below are examples of various Celtic knots.

Below is an example of how to layout the cuts made in the blank before turning.  You must make deep cuts just 1/8″ short of going through to hold it together until glued.  Place a different colored 1/8″ thick wood blank in each slot, cut and glue one at a time.

Some other tips he shared:

• Rolling pions are between 19”-22” in length, so starting with a 3″x3″, 24” long blank is best
• 35 degree cut works well, 1/8” wide and 2 7/8” through
• Cut one at a time, glue in the insert and after 6 hours cut off excess and cut next side, so prep takes about 2 days
• Use Titebond or epoxy glue
• Each handle is about 4” long to fit a hand well
• Using a sanding block helps keep the rolling pin flat when sanding
• Use table saw sled at angle, table saw blade is vertical, but use a block for perfect repeat  

Due to the demo lathe’s size limits Paul used smaller pieces to show how it’s done.

Look at this beautiful final product, when done on a full sized lathe.

We had a normal meeting at the Rivet including a business discussions, show and tell and an in-depth presentation and sharpening demonstration by our very own Larry Lukens.

Several people showed the nice pieces they had created

Larry showed us how to sharpen our tools