Tag: 2022

We had a regular meeting at the Rivet with a live sharpening demonstration planned. Unfortunately Larry suffered an accident prior to the meeting so we watched a sharpening video instead.

Paul Demmert showed how 8 different finishes look on bowls made from the same wood and ranked and rated them on various attributes. His notes are below the meeting video.

The genesis of this presentation was a presentation the club had several years ago with Jim Finley talking about finishes.  The idea that took root in my mind was to show a variety of finishes on bowls that were all the same kind of wood.  This would allow a comparison among the different finishes.

About 1 year ago I got access to a large log of American Holly and that was an opportunity to build this presentation on the different finishes.  American Holly, Ilex opaca, is a species of holly, native to the eastern and south-central United States, from coastal Massachusetts south to central Florida, and west to southeastern Missouri and eastern Texas.  It is the state tree of Delaware.  Ilex opaca is a medium-sized broadleaved evergreen tree growing on average to 10–20 m (33–66 ft) wide canopy, and up to 30 m (98 ft) tall. Typically, its trunk diameter reaches 50 cm (20 in), sometimes up to 120 cm (47 in). The bark is light gray, roughened by small warty lumps.  The wood is very pale, tough, close-grained, takes a good polish, and is used for whip-handles, engraving blocks and also cabinet work.  (specialty items such as fancy cabinet inlays, small pieces of furniture, brush backs, handles, novelties, wood engravings, scroll work, woodcuts and carvings, and measuring scales and rules for scientific instruments).  Ideal lumber has a very uniform, pale white color with virtually no visible grain pattern. Janka Hardness: 1,020 lb_f  (red oak 1290, black walnut 1010, cherry 950)  

Because Holly has such a subdued grain pattern, it takes coloring dyes very well.  Because of this, Holly can be dyed black and used as a substitute for ebony–for piano keys, violin pegs, and fingerboards.  Knots are common, which can reduce the usable area of the wood.

Holly is usually cut during the winter and kiln dried shortly thereafter to preserve the white color of the wood.  Holly can develop a bluish/gray fungal stain if not dried rapidly after cutting and this will be evident on the bowls I have for this presentation, because I didn’t get the bowls turned until over 6 months after it had been cut down in the late summer to early fall.

I have turned holly once before and that was a tree that had been cut down at my Father-in-Laws house and my wife grabbed a couple of sections of that tree after it had been hauled off to the dump.  I turned that holly green, right after Leslie got it home so the resultant bowls were pure white, with no visible grain, almost like porcelain.  Again this holly was turned within a month of being cut down.

This wood came from a landscape company in Altoona.  In the fall of 2021 I went to pick up the wood.  It was a single log, 8 ft long, 12-14 in diameter.  The worker helped me by cutting the log into sections that were 16-18 in long, weighing about as much as a single person could carry.   I stored the sections in my basement and painted Anchor Seal on the ends of the sections to seal the end grain.

Later I cut the sections in half with my chainsaw, right down the pith, giving me 2 bowl blanks per section.  

I turned all of the bowls from March 6 to April 9 2022.  All of the bowls were turned green, with the foot of the bowls pointing to the bark part of the blank, the inside of the bowls oriented towards the pith or the center of the tree.  These bowls were only turned once, air dried for about 5 months (from April to August), and hand-sanded.  Note that my bowls are functional, rather than artistic—wall thickness is between 3/16 to 3/8 inch.  There was some movement in the bowls during drying, but some bowls help their shape pretty well.  None of the bowls were remounted for a second turning.  I started finishing the bowls in late August and applied last coat in early October.

In this demonstration, I did not try to sand and buff out the bowls to make them perfect.  Some of them still have brush marks and other defects in the finish that I need to address.  I wanted to concentrate on the impression the finish makes on the viewer.  This is very subjective.  Also remember that results are dependent on the wood species—particularly if you are looking to see how much the tone of the wood has darkened after finish has been applied.  This would not be a consideration if the bowls were turned from walnut, cherry, hickory, or other darker woods.

From my perspective #4, #3, #7 and #2 take on the “best” appearance, because these bowls still retain a lighter tone that is more consistent with the lighter color of Holly.

Bowls #6 and #8 come in at the end of the pack for the same reason—they darken the tone of the wood too much.  Even though, #8 has a nice looking finish overall.

Our first meeting after the summer break was a nice relaxed time to catch up on what everyone had been doing and making over the summer with a big show and tell and Q&A time. Held at the normal place, at the normal time – The RIvet at 7pm on the first Wednesday of the month.